NEWS & EVENTS
LIUGONG Aerial Machinery Releases Eight New Products
On November 28, the LIUGONG Aerial Machinery New Product Release Conference with the theme of "Green·Smart·Extending Human Power" was held in Zhenjiang, Jiangsu. More than 300 guests gathered to approach Jiangsu LIUGONG and taste LIUGONG's green and smart products. A total of eight new LIUGONG aerial machinery products were released on site.
At the site, the guests experienced the outstanding operability and performance of LIUGONG aerial machinery through dynamic and static product demonstrations and test rides.
LS0610EC: An electric crawler product with a maximum operating height of 7.8m, one-button leveling of the outriggers, suitable for non-paved roads and slope operations; both walking and lifting are driven by AC motors, energy-saving and maintenance-free; pull-out inspection compartment, convenient maintenance.
LS1623ERT: Electric wheeled off-road product with a maximum operating height of 18m, equipped with a 4.2m×1.82m working platform, which can be extended in both directions, with a load capacity of 680kg, and efficient operation; 23° large departure angle and approach angle, strong climbing and transfer capabilities; four-wheel electric drive, floating axle, strong passability.
LT18JE-C/LT30JE-C: The same platform product developed on the basis of the existing LIUGONG star products, with a high degree of modularization and generalization; LT18JE-C has an unrestricted load of 350kg and a standard 2.4m large platform; LT30JE-C has a 300/454kg dual load design; the travel motor adopts a two-in-one integrated drive, and the pump motor adopts a permanent magnet synchronous motor, which is more energy-efficient.
LT30SE-Shipyard Special: An integrated fully protected working platform, more suitable for shipyard working conditions; the boom drag chain and exposed parts are all enclosed with a full steel cover to prevent dust and collision; electric is more environmentally friendly and has a lower cost of use.
LM09JE telescopic aerial work platform: maximum working height 11.2m, compact structure (length 2.6m × width 1m × height 2m), the sleeve can rotate 345°, suitable for narrow space operation; maximum working range 3.6m, strong obstacle crossing ability; equipped with hydraulic drive pothole protection system, safe and worry-free high-altitude walking.
LTH0735A telescopic arm forklift: maximum lifting height 6.9m, rated load 3.5t, the whole machine is equipped with an in-line high-pressure rail supply turbocharged engine, which is powerful and meets both vehicle speed and traction; the walking system adopts hydrostatic technology and has good controllability; it adopts a hydraulic wet brake system, which is safe and reliable; it is equipped with a variety of accessories, such as forks, buckets, hooks, etc., to meet different operation needs; it is equipped with a forward and reverse cooling fan, and the cabin can be self-cleaned with one button; the cab meets the FOPS/ROPS standard, is designed according to ergonomics, and is equipped with an air suspension seat for comfortable driving.
LTH1440 telescopic forklift: maximum lifting height 13.6m, rated load 4t; standard weighing protection system; equipped with hydraulic quick-change function; four-wheel four-wheel drive, strong maneuverability and flexibility; reasonable wheelbase and center of gravity arrangement, front frog-leg stabilizer and body leveling device, strong vehicle stability.
